iedge Blog
LONG STEEL PRODUCERS WITH PE BELOW 2
STEELMAKING STANDARD COST & LONG STEEL PRODUCERS
WITH PE BELOW 2
The objective of this write up is to use the standard cost approach to calculate cost
per metric ton of long steel production and also to project the profit target of
Big 4 long steel companies in Malaysia.
Standard Cost is defines as the predetermined cost based on technical estimates for
materials, labour, and overhead for a selected period; for a prescribed set of working
conditions. Standard costing pre-determines all costs, compares them with actual costs,
and analyses the reasons for variance. The management then either takes steps to
eliminate the variance, or revise standard costs based on new realities.
STEELMAKING STANDARD COST
The steelmaking standard cost model that I used here was extracted from
http://steelonthenet.com, a United Kingdom's steel industry news and information
portal and I adjusted the input cost of raw material, labour and overhead to reflect local
scenario.
Related Stocks
| Chart | Stock Name | Last | Change | Volume |
|---|
Discussions
9 people like this. Showing 26 of 26 comments
Please adjust your machine capacity. Design capacity no equivalent to operation capacity. Machine got downtime, setting time, and routine maintenance. 70 to 80% of design capacity is reality.
2017-10-06 14:24
Thank you. Very detailed analysis. Enhanced version compared to "earlier version".
2017-10-06 14:27
Market selling price also fluctuate from time to time, unless you can get an exactly average selling price for year 2017, else you won't get a more accurate figure of profit.
2017-10-06 14:27
Your piece of calculation is good. But, two variables you input need to review. First is capacity, Second which is most important is Average Selling Price (ASP) too optimistic.
2017-10-06 14:45
The demand (demand=full capacity) is also too optimistic.
Anyway, you give me hope. Hope is a good thing.
Thank you very much.
2017-10-06 14:58
since everything is so rosy, I decided to take all information at half valution
therefore, masteel 1.29 x 2 = PE 2.58 is still dirt cheap for a no borrowing companry
2017-10-06 15:48
please note that Masteel capacity is 700000mt, last year they run at 80% capacity utilisation. they stated to increase 8% from last year performance. Therefore, estimated volume is 600,000mt. 600,000 x assuming very conservation RM300 = 180million / 4 = 45million per quarter of NP.
2017-10-06 16:45
A commodity business. Lowest cost producer is the winner. Masteel look interesting in that aspect. But many other variables were not included in the model. Still a great model nonetheless!
2017-10-06 21:15
Ann joo is very different from other steel mills because its storage capacity is highest although its production capacity is lower.
2017-10-06 22:24
well, nice calculation. I am sure u have spend a lot of time on this article. Appreciate for ur dedication.
2017-10-07 01:36
@rojakmee, this is simply. not only lionind, ssteel and annjoo face the same problem. There are only one winner in Q2. This is because three of them buy expensive raw materials in Q1, but masteel didnt. Thus, when it come to Q2, only masteel have lower raw material, but take note that masteel is using the last year raw material. However, this wont make masteel show any advantage in future... Masteel just lucky for this time. Let see Q3 then we will know the truth.
2017-10-07 01:40
why both Annjoo eaf,bf profit not merge together then shares divide the total profit ? Should be PE 1.19 for Annjoo
2017-10-07 01:56
great work!! but too optimistic.top up RM200/t for each scenario for more realistic..
2017-10-07 08:39
Annjoo can use local iron ore.which is cheaper than USD70/t.but cannot use coal, should be use coke.
2017-10-07 08:41
Hi guys,
A Word of Caution from Peter Lynch
Steel is a cyclical stock.
And contrary to normal growth stock you must invest "DIFFERENTLY".
At its bottom Steel Stocks have high P/E and people will avoid
like
Prestar at 46 sen
Masteel below 40 sen
ANNJOO BELOW 70 SEN
SSteel below 80 sen
So if you base your investment criteria on P/E you would have missed the above 4 Stocks when prices are cheap.
Of course Cyclical Long Steel with good business due to Highways & MRT construction garnered the best sales. And now P/E is low.
But prices have surged 100% to 200% in tandem.
Therefore Steel Counters no longer cheap.
And low P/E now turns into a dangerous trap for those who chase High High Priced Steel Counters.
SO FOR CYCLICALS YOU MUST BUY WHEN P/E IS HIGH
AND YOU MUST CERTAINLY SELL NOW WHEN P/E IS LOW
Listen to Peter Lynch's words below:
"Anticipate a shrinking P/E multiple over the time as business recovers and investors begin to look ahead to the end of the cycle, when peak earnings are achieved."
IT SAYS,
"ANTICIPATE A SHRINKING P/E MULTIPLE OVER TIME AS BUSINESS RECOVERS"
As steel sells well P/E shrinks to lower digits (one or two p/e also possible)
"INVESTORS BEGIN TO LOOK AHEAD TO THE END OF THE CYCLE, WHEN PEAK EARNINGS ARE ACHIEVED"
What do these words mean?
1) TRUE SMART INVESTORS LOOK AHEAD.
To see that Business is Now at ITS PEAK.
2) LOOK AHEAD TO THE END OF THE CYCLE, WHEN PEAK EARNINGS ARE ACHIEVED
So the CYCLE WILL COME TO THE VERY PEAK. AND P/E WILL BE AT THE LOWEST.
AND THEN?
"THE END"!!!
FROM THE SUMMIT OF THE MOUNTAIN EARNINGS WILL THEN GO DOWNHILL.
SO BUY BUYING INTO LOW P/E NAIVE & SORCHAI WILL GET TRAPPED KAW KAW!!!
That was how Prestar rose from 60 Sen to Rm1.00
And Directors of Prestar got caught buying Prestar near Rm1.00 in year 2006/7 10 years ago.
This round Prestar Directors whose fingers have been burnt badly last round are wiser & selling now
See
ENCIK MD NAHAR BIN NOORDIN 27-Sep-2017 Disposed 67,200 1.350 View Detail
ENCIK MD NAHAR BIN NOORDIN 20-Sep-2017 Disposed 25,000 1.400 View Detail
ENCIK MD NAHAR BIN NOORDIN 19-Sep-2017 Disposed 40,000 1.410 View Detail
MR TOH YEW KEAT 13-Sep-2017 Disposed 20,000 1.450 View Detail
MR TOH YEW KEAT 08-Sep-2017 Disposed 10,000 1.450 View Detail
DATO' LIM CHEANG NYOK 06-Sep-2017 Disposed 50,000 1.410 View Detail
MR LIM CHEANG NYOK 28-Aug-2017 Disposed 50,000 1.400 View Detail
EN MD NAHAR BIN NOORDIN 24-Aug-2017 Disposed 70,000 1.450
This is from Calvin Tan Research personal experience with Steel Stocks over a 10 year period
Regards,
Calvin
2017-10-07 10:56
Speaking of directors/management, it might be prudent for those unaware to note this too:
http://www.malaysiastock.biz/Company-Announcement.aspx?id=939645
2017-10-07 12:43
Thx to iedge
for append us the thoroughly infos for the BIG4 Long Steel players.
2017-10-07 15:10
Post a Comment
Featured Posts
Latest Videos
Apps
Top Articles
1
Stock Market Enthusiast
Top 3 AI/Data Center Newsflow for the 3rd Week of December - #TENAGA, #YTL, #YTLPOWER
2
save malaysia!
3
save malaysia!
5
6
save malaysia!
7
Good Articles to Share
China property flare-ups resurface as crisis enters fifth year
8
Good Articles to Share
US fighter shot down in 'apparent case of friendly fire' over Red Sea
#
Stock
Score
Daily Stocks
Stock Name
Last
Change
Volume
Stock Name
Last
Change
Volume
Stock Name
Last
Change
Volume
Featured Advertisers / Partners
Ride The Bull Short The Bear
CS Tan
4.9 / 5.0
This book is the result of the author's many years of experience and observation throughout his 26 years in the stockbroking industry. It was written for general public to learn to invest based on facts and not on fantasies or hearsay....
Jeffbkt
Good Job but please study if you can the operating cost of the 3 company in Q2 especially LIONIND and compare with your estimated Q3 operating cost.
2017-10-06 14:14